Jika anda
ingin memperbaiki dan meng-update BIOS PC atau Laptop maupun NoteBook yang
rusak dan pada tampilan muncul [searching BIOS at floopy/Cdrom] coba anda ikuti
langkah-langkahnya sebagai berikut :
Pada hal ini
contoh BIOS ASUS P5S800-VM.
1. Siapkan
Update BIOS pada Disket ataupun pada CD ( Pada hal ini Update BIOS P5S800-VM )
2. Hidupkan
Komputer dan setting komputer supaya Booting dari Floopy Disk maupun CDROM
3. Setelah
di konfigurasi Boot-nya masukan Disket Update BIOS atau CD Update BIOS
4. Biarkan
Komputer mendeteksi Disket atau CD Update BIOS tersebut
5. Maka
Secara Otomatis apabila file Update BIOS sesuai dengan tipe Motherboard yang
dipakai oleh komputer kita, maka komputer akan menulis file update BIOS
tersebut dan menyimpannya ke Chipset BIOS
6. Restart
komputer
Tapi kalau
BIOS-nya masih berfungsi dan mau di upgrade ke versi yang lebih tinggi maupun
lebih rendah, caranya :
1. Masukan
CD Startup Win98
2. Boot dari
CDROM
3. Setelah
masuk ke prompt ( a:/ )
4. Masukkan
Disket atau CD yang berisi File update terbaru BIOS beserta file AFUDOS.EXE (
Bisa anda dapatkan di CD Driver motherboard. Biasanya terdapat di folder "Software"
)
5. Cari
drive tempat file ini berada ( misal di A:/ )
6. ketik (
a:/>afudos /i[nama file BIOS] /o[nama file BIOS] )
7. Tunggu
proses berjalan ( Penting..! : Jangan matikan komputer yang sedang melakukan
proses update BIOS, karena apabila itu terjadi motherboard akan rusak )
8. Restart
Komputer
Catatan :
Setelah
men-download Update terbaru BIOS, ubah namanya menjadi xxxxx.rom
Contoh:
P5S800-VM-ASUS-1023.003
( File hasil download ) diubah file-nya/rename menjadi P5S800VM.rom
Kalau masih
bingung tentang penjelasan saya;maka lihat penjelasan dibawah ini :
Upon First
Use of this Motherboard Series
1. Please
insert a clean, unformatted disk into A:\ drive and boot the system into DOS
mode. In DOS mode, please type in C:\> FORMAT A: /S or click on “My
Computer” icon under Windows O/S, right click on drive A:\ and choose“Format”.
By using the procedure above, you can create a boot disk without AUTOEXEC.BAT
and CONFIG.SYS files.
2. Then,
place the bundled M/B support CD into the optical drive. Copy AFUDOS.EXE (
unzipped) onto your boot disk. Otherwise, please refer to ASUS Download Site
for latest version of AFUDOS.EXE BIOS tool utility , please remember to
decompress the file before copy it onto the boot disk. ASUS Download Site is
located at :
http://support.asus.com/download/download.aspx?SLanguage=en-us
Warning:
AFUDOS.EXE (
unzipped ) can only be executed in DOS mode and not from MS-DOS Prompt in
Windows O/S. As a result, no matter if you wish to backup or update the BIOS
content, you must create a new boot disk. Please copy AFUDOS.EXE into the disk
which you wish to boot the system. In addition, in the BIOS device boot
sequence, you must set boot from “Floppy Drive” as the first device in the
order of boot sequence.
AFUDOS BIOS
Update Procedure ( If neccessary )
1.Please use
the prepared boot disk to boot into DOS mode. Then, type in the following
commands:
afudos /i
For example, afudos /ip4c800b.rom,
refers to
the fullname of the BIOS file. The following shows the procedure of BIOS
refreshing.
Note: Please
don’t switch off or reboot the system during BIOS refreshing! By doing so, you
will cause serious damage to your system.
2. After
BIOS refreshing is complete, the utility will return to DOS prompt ( as shown
in the figure below ), please take out the floppy disk and reboot the system to
enter the BIOS Menu.
Use built-in
EZ Flash BIOS to Refresh :
1. Download
latest ASUS BIOS from ASUS WWW and rename the BIOS filename to “xxxxx.rom” (
xxxxx represents the motherboard model you used, eg. P4C800 BIOS is named
P4C800.rom ), and save the file in a floppy disk.
2. Reboot
the system.
3. When the
system is at POST after reboot, please hold down “Alt” + “F2? to view the
following image. You may start executing EZ Flash utility. Please place the
floppy disk with latest BIOS inside and insert into the floppy drive.
Note: If you
have not placed any floppy disk into the floppy drive, you will see a warning
message stating “Floppy not found”. If the utility can not find the correct
files in the floppy disk, it will show “p4c800.rom not found!” ( Assuming the
motherboard is P4C800 ) message.
4. The
system will auto-detect whether the floppy disk contains the relevant files in
the floppy drive. If there is no problem, the EZ Flash utility will begin
auto-refreshing and reboot the system once it is done . The procedure for
refreshing is show below.
Note: Please
don’t turn off or reboot the system during BIOS refreshing! By doing so, you
will cause serious damage to your system!
Semoga
Berhasil dalam Meng-update BIOS
Makasih min, sudah share
BalasHapushttps://cody.id/produk/blower-infrared/
CODY***GARANSI SELAMANYA***
== HARGA DIJAMIN LEBIH MURAH ==
=== jASA SERVICE YG PASTI LEBIH CEPAT ===